January 10, 2013

NASA Chases Climate Change Clues Into the Stratosphere

Starting this month, NASA will send a remotely piloted research aircraft as high as 65,000 feet over the tropical Pacific Ocean to probe unexplored regions of the upper atmosphere for answers to how a warming climate is changing Earth.
NASA In its new white-and-blue NASA livery, an early development model of the Global Hawk unmanned aircraft rests on the ramp at the Dryden Flight Research Center, Edwards AFB, Calif. (Credit: NASA)

The first flights of the Airborne Tropical Tropopause Experiment (ATTREX), a multi-year airborne science campaign with a heavily instrumented Global Hawk aircraft, will take off from and be operated by NASA's Dryden Flight Research Center at Edwards Air Force Base in California. The Global Hawk is able to make 30-hour flights.
Water vapor and ozone in the stratosphere can have a large impact on Earth's climate. The processes that drive the rise and fall of these compounds, especially water vapor, are not well understood. This limits scientists' ability to predict how these changes will influence global climate in the future. ATTREX will study moisture and chemical composition in the upper regions of the troposphere, the lowest layer of Earth's atmosphere. The tropopause layer between the troposphere and stratosphere, 8 miles to 11 miles above Earth's surface, is the point where water vapor, ozone and other gases enter the stratosphere.
Studies have shown even small changes in stratospheric humidity may have significant climate impacts. Predictions of stratospheric humidity changes are uncertain because of gaps in the understanding of the physical processes occurring in the tropical tropopause layer. ATTREX will use the Global Hawk to carry instruments to sample this layer near the equator off the coast of Central America.
"The ATTREX payload will provide unprecedented measurements of the tropical tropopause," said Eric Jensen, ATTREX principal investigator at NASA's Ames Research Center in Moffett Field, Calif. "This is our first opportunity to sample the tropopause region during winter in the northern hemisphere when it is coldest and extremely dry air enters the stratosphere."
Led by Jensen and project manager Dave Jordan of Ames, ATTREX scientists installed 11 instruments in the Global Hawk. The instruments include remote sensors for measuring clouds, trace gases and temperatures above and below the aircraft, as well as instruments to measure water vapor, cloud properties, meteorological conditions, radiation fields and numerous trace gases around the aircraft. Engineering test flights conducted in 2011 ensured the aircraft and instruments operated well at the very cold temperatures encountered at high altitudes in the tropics, which can reach minus 115 degrees Fahrenheit.
Six science flights are planned between Jan. 16 and March 15. The ATTREX team also is planning remote deployments to Guam and Australia in 2014. Scientists hope to use the acquired data to improve global model predictions of stratospheric humidity and composition. The ATTREX team consists of investigators from Ames and three other NASA facilities; the Langley Research Center in Hampton, Va., Goddard Space Flight Center in Greenbelt, Md., and Jet Propulsion Laboratory in Pasadena, Calif. The team also includes investigators from the National Oceanic and Atmospheric Administration, National Center for Atmospheric Research, academia, and private industry.
ATTREX is one of the first investigations in NASA's new Venture-class series of low- to moderate-cost projects. The Earth Venture missions are part of NASA's Earth System Science Pathfinder Program managed by Langley. These small, targeted science investigations complement NASA's larger science research satellite missions.
For more information about the ATTREX mission, visit:http://espo.nasa.gov/missions/attrex
A digital ATTREX press kit is available at:http://www.nasa.gov/centers/ames/events/2013/attrex.html

Post Comment

United Airlines ends transport of research primates


United Airlines, the world’s largest carrier, will no longer ship non-human primates to research labs. Clarifying a policy that has been ambiguous since it merged with Continental Airlines in 2010, the airline today issued this statement: “We do not book, accept or transport non-human primates to or from medical research facilities domestically or internationally. We do ship non-human primates between zoos and sanctuaries within the 50 United States and Puerto Rico.”
With the adoption of similar rules by Air Canada last month, there are no longer any North American carriers that will move the thousands of primates that are imported each year to the United States and Canada. The number of major airlines that say they fly research primates has now dwindled to four: Air France, China Eastern Airlines, Philippine Airlines, and Vietnam Airlines.
United has been under pressure from activists with People for the Ethical Treatment of Animals (PETA), which launched a campaign after the merger, demanding that the merged airline explicitly adopt a policy banning research primate transport. Prior to the merger, Continental transported research primates; United did not. PETA says that its supporters sent 130,000 protest emails to the carrier, and demonstrated at its office in Sydney, Australia and at its Chicago headquarters. (Protestors are pictured there in May, 2012.)
The announcement marks an about face from a fiercely pro-research stance that a United official published on the website of the Animal Transportation Association in September, 2011. It challenges other airlines to review their policies forbidding research primate transport. It reads, in part:
“Virtually every major medical advance of the last century has depended upon research with animals … I know that the greater good of mankind can be served by our assisting this industry in the transport of these animals.”
Lisa Schoppa, the author of the statement and then the manager of United’s PetSafe programme, has since left the company. A United spokeswoman would not say when and why she left.

Post Comment

January 9, 2013

Europe’s untamed carbon

The Belchatow power station in Poland is Europe’s largest coal-burning plant, but plans to capture carbon dioxide from it are in limbo.

With its carbon-trading market and tough emissions targets, Europe plays the part of responsible adult at climate-policy negotiations. But in a growing blemish on its low-carbon image, the region has fallen behind North America in the slow crawl to demonstrate systems for capturing greenhouse-gas emissions from power plants and industry — even as it increases its use of coal.
Announcements made just before Christmas underlined Europe’s troubles in launching large carbon capture and storage (CCS) projects. A European Commission fund set up two years ago in part to support CCS could not find a single scheme to finance, and instead gave €1.2 billion (US$1.6 billion) to renewable-energy projects. And in a mortifying side note, the International Energy Agency (IEA) noted that as the switch from coal to shale gas in the United States lowers the price of coal, Europe — where gas is expensive — is burning more of this dirtier fuel. “It is hugely embarrassing for Europe’s inter­national standing on climate,” says Vivian Scott, who studies the role of CCS in climate policy at the University of Edinburgh, UK.
Admittedly, no country is finding CCS easy to fund. The technology to sieve carbon dioxide from exhaust gases has been demonstrated on a small scale, and four large projects have successfully stored the gas underground. But not one large carbon-capture system is operating at a power plant anywhere in the world. Fitting a large power plant with CCS would increase the price of its electricity by 50–100%, requiring hundreds of millions of dollars in subsidies.
Four years ago, the IEA set out a road map that called for building 100 CCS projects by 2020, together capturing around 150 million tonnes of carbon dioxide annually. Monitoring progress today, Scott says that the world will be lucky to see 20 completed in that time (see ‘Carbon capture sputtering’). “The reality is that incentives in place for renewable energy are not in place for CCS. Government policies are not ambitious enough to drive large CCS projects,” says Juho Lipponen, head of CCS at the IEA. Governments have pledged an estimated $20 billion for CCS demonstrations, but more like $100 billion would be needed to meet the IEA’s original road map, he adds.

European delays

Yet the CCS industry in Europe has been hit particularly hard, by a combination of economic recession, political reluctance and Brussels bureaucracy. Europe has favoured wind and solar projects, with both direct grants and ‘feed-in tariffs’ that guarantee high prices for low-carbon electricity. Per unit of electricity, these subsidies have been as generous as those needed for CCS — but because the projects are smaller, individual payments are less daunting. CCS has had some direct grants but no feed-in tariffs; instead, plant operators were expected to benefit from Europe’s emissions-tradingscheme, under which polluting industries trade allowances to emit carbon dioxide. Utility companies that built CCS projects would be able to sell excess carbon credits, and the sale of 300 million credits would also finance a European CCS funding scheme (known as NER300).
But the price of credits collapsed to €6–7 per tonne last year, as the recession cut industrial emissions. Last year, a sale of 200 million credits raised only €1.5 billion, one-third of what planners had hoped for. “The collapse of the emissions-trading-scheme price is the biggest culprit for the lack of progress,” says Howard Herzog, a sequestration researcher at the Massachusetts Institute of Technology in Cambridge.
Even so, the commission’s fund had shortlisted ten CCS projects by July 2012, waiting for guarantees of co-funding from member states. But five of the six countries in which the plants were to be built — the United Kingdom, the Netherlands, Poland, Italy and Romania — “didn’t step up to the plate,” says Chris Davies, a British member of the European parliament who advocated for the CCS fund. Meanwhile, a plan to capture carbon emissions from a French steel plant became a casualty when owners ArcelorMittal, based in Luxembourg, pulled out of the scheme.
The missed opportunity has delayed CCS in Europe by two years, says Philippe Paelinck, who oversees CCS development at French engineering firm Alstom, based in Levallois-Perret outside Paris. Alstom runs carbon-capture technology at a number of pilot projects and had hoped to scale it up at three NER300 candidate projects. Nevertheless, the NER300 fund will award a second phase of grants, potentially this year; Paelinck thinks CCS projects in the United Kingdom, Romania and the Netherlands are well placed to gain some funding. Separate funding schemes, such as a £1-billion (US$1.6-billion) CCS competition in the United Kingdom — which is revamping its electricity market to allow tariff-like support for CCS — could also launch projects. “There’s still activity for CCS in Europe: it’s just proving to be a much harder sell than initially thought,” says Lipponen.

A helping hand from oil

In the United States and Canada, CCS project developers have made faster headway by combining public subsidies with sales of the carbon dioxide they capture. Oil companies inject the gas — which sells for $20–40 per tonne — into the ground to help to loosen trapped oil. Two large North American projects are due to start capturing carbon in 2014: Canada’s Can$1.24-billion (US$1.26-billion) Boundary Dam project in Saskatchewan, a 100-megawatt project that would rebuild one unit of an existing coal-fired plant; and the US$2.4-billion Texas Clean Energy Project near Odessa, a new 400-megawatt power plant that would gasify its coal before burning. A similar $2.4-billion plant in Kemper County, Mississippi, is also scheduled to start operation in 2014 but is currently facing a legal dispute over whether it can raise local electricity rates.
“Time will tell whether this technology has a market. For now it’s important to see these plants up and running.”
Funding CCS by striking deals with oil producers is not an option in oil-poor parts of Europe, however. And Stuart Haszeldine, a geologist at the University of Edinburgh, cautions that although selling carbon dioxide for oil extraction may help to get the industry going, it comes at the cost of the carbon emitted from the extra oil: he claims (in unpublished calculations) that once oil production is factored in, CCS funded in this way could actually cut emissions by only 10%.

Still, CCS advocates say that large-scale demonstrations of the technology are crucial because CCS offers the only way to clean up emissions from coal, which the IEA predicts will overtake oil to become the world’s leading energy source by 2017. “Time will tell whether this technology has a market. For now it’s important to see these plants up and running,” says Julio Friedmann, head of the carbon-management programme at Lawrence Livermore National Laboratory in California. No country with long-term climate obligations could seriously meet them without CCS, he says. “Yet Europe is shutting down nuclear plants, building coal plants, and not keenly pursuing CCS. So the question is, is it serious about cutting emissions?”


Post Comment

January 2, 2013

New World Record Set for Solar Cells: 44% Efficiency


The National Renewable Energy Laboratory (NREL), and their industry partner Solar Junction, have just set the bar even higher in the race for ultra-high-effiency photovoltaic (PV) cells by achieving another world record of 44% efficiency.
The newest cells build on previous successes with multi-junction PV cells (which use layered semiconductors, with each layer optimized to capture different wavelengths of light) and combine them with low-cost concentrating lenses to multiply the intensity of the sun's energy hitting the cells.
Last year, NREL and Solar Junction set a record in efficiency with their SJ3 cells, which are designed for use in utility-scale concentrated solar photovoltaic projects. The SJ3 was verified as being able to convert 43.5% (at 415 suns - a measurement of the intensity of the sun's energy when multiplied) of the energy in sunlight into electricity, but this latest iteration set a new high of 44% efficiency (at 947 suns).
The breakthrough garnered NREL yet another R&D 100 award from R&D Magazine, their third so far, and according to them, it, along with other advances, could "pave the way for a 50%-efficient solar cell in the not-distant future".
Advances such as these are great showcases for the possibilities of public/private partnerships, as Daniel Friedman, manager of the NREL III-V Multijunction Photovoltaics Group states:
"This is really a classic example of NREL developing something and then industry picking it up and running with it and making it a great commercial success. We started with some very basic materials research. We took it to the point where it made sense for industry to take over and take it to the marketplace.
We conceived the cell, demonstrated the individual parts, and let the world know about it. But Solar Junction put all the parts together with record-breaking results, made it work with MBE, and commercialized it at a time when no one else seemed to be interested in or able to do it." - Friedman

Post Comment

December 20, 2012

Air Pollution is Responsible for 3 Million Premature Deaths a Year

Flickr/CC BY 2.0

Air quality has certainly improved in the U.S. over the last few decades—thanks to the Clean Air Act—but it's still one of the top health concerns around the world. A new report compiled by global health professionals pegs the toll of outdoor air pollution at a staggering 3.2 million premature deaths a year.
Particulate pollution like soot does the most damage, especially in the booming smog-choked cities across Asia. The report, published in the Lancet, finds that outdoor air pollution is the No. 4 health risk there, right behind smoking. Here in the U.S., it's still a major threat too, despite our progress since the sooty seventies. The report asserts that air pollution is the 8th greatest danger to premature birth worldwide.
The NRDC explains how it is that air pollution is so deadly:
It is the very finest soot – so small that it lodges deep within the lungs and from there enters the bloodstream – that contributes to most of the public health toll of air pollution including mortality. Diesel soot, which is also a carcinogen, is a major problem because it is concentrated in cities along transportation corridors impacting densely populated areas. It is thought to contribute to half the premature deaths from air pollution in urban centers. For example one in six people in the U.S. live near a diesel pollution hot spot like a rail yard, port terminal or freeway.
Point is, there are still hundreds of millions—if not billions—of people around the world who suffer the ill effects of particulate pollution. It's not just premature deaths, either; it's asthma, respiratory illness, cancer, and so on. Transitioning to cleaner energy sources and cleaner, lower-emissions vehicles will begin alleviate that suffering.
And we should be probably be actively working towards a world where three million people don't have to die early every year because they live too near a truck route or a power plant.

Post Comment

March 13, 2012

What Have We Got in Common With a Gorilla? Insight Into Human Evolution from Gorilla Genome Sequence


Researchers have just completed the genome sequence for the gorilla -- the last genus of the living great apes to have its genome decoded. While confirming that our closest relative is the chimpanzee, the team show that much of the human genome more closely resembles the gorilla than it does the chimpanzee genome.
This is the first time scientists have been able to compare the genomes of all four living great apes: humans, chimpanzees, gorillas and orang-utans. This study provides a unique perspective on our own origins and is an important resource for research into human evolution and biology, as well as for gorilla biology and conservation.
"The gorilla genome is important because it sheds light on the time when our ancestors diverged from our closest evolutionary cousins. It also lets us explore the similarities and differences between our genes and those of gorilla, the largest living primate," says Aylwyn Scally, first author from the Wellcome Trust Sanger Institute. "Using DNA from Kamilah, a female western lowland gorilla, we assembled a gorilla genome sequence and compared it with the genomes of the other great apes. We also sampled DNA sequences from other gorillas in order to explore genetic differences between gorilla species."
The team searched more than 11,000 genes in human, chimpanzee and gorilla for genetic changes important in evolution. Humans and chimpanzees are genetically closest to each other over most of the genome, but the team found many places where this is not the case. 15% of the human genome is closer to the gorilla genome than it is to chimpanzee, and 15% of the chimpanzee genome is closer to the gorilla than human.
"Our most significant findings reveal not only differences between the species reflecting millions of years of evolutionary divergence, but also similarities in parallel changes over time since their common ancestor," says Dr Chris Tyler-Smith, senior author from the Wellcome Trust Sanger Institute. "We found that gorillas share many parallel genetic changes with humans including the evolution of our hearing. Scientists had suggested that the rapid evolution of human hearing genes was linked to the evolution of language. Our results cast doubt on this, as hearing genes have evolved in gorillas at a similar rate to those in humans."
This research also illuminates the timing of splits between species. Although we commonly think of species diverging at a single point in time, this does not always reflect reality: species can separate over an extended period of time.
The team found that divergence of gorillas from humans and chimpanzees occurred around ten million years ago. The split between eastern and western gorillas was much more recent, in the last million years or so, and was gradual, although they are now genetically distinct. This split is comparable in some ways to the split between chimpanzees and bonobos, or modern humans and Neanderthals.
"Our research completes the genetic picture for overall comparisons of the great apes," says Dr Richard Durbin, senior author from the Wellcome Trust Sanger Institute, "After decades of debate, our genetic interpretations are now consistent with the fossil record and provide a way for palaeontologists and geneticists to work within the same framework.
"Our data are the last genetic piece we can gather for this puzzle: there are no other living great ape genera to study."
Gorillas survive today in just a few isolated and endangered populations in the equatorial forests of central Africa. They are severely threatened and their numbers are diminishing. This research not only informs us about human evolution, but highlights the importance of protecting and conserving the full diversity of these remarkable species.

Post Comment

HP Labs Using Laser-Powered Chips for Faster, Energy-Efficient Computing


Nothing is faster than the speed of light(except the Neutrinos). So you might think that is why HP Labs wants to use photonics (light) instead of electrons to set new computing speed limits. But you would be wrong.
HP Labs' laser-based chip project, codenamed Corona, would use light instead of electricity to communicate information between chip cores and also from the chips to memory in order to save space and to save energy.
Laser beam

A Short History of Data on the Wire

If you are old enough (or curious enough), you may have tested your soldering skills assembling electronic bits and pieces into primitive number crunchers consisting of transistors that are, literally, wired together. All those electronic parts and wires were replaced by the integrated circuits, aka microchips, which remain the basis of the modern computer.
An integrated circuit consists, typically, of a silicon wafer that carries thousands, or even millions, of electronic components (resistors, capacitors, and transistors) that are "wired" together by electrodeposited metals. The miniaturization and compression of these components are the subject of "Moore's Law", which observes that the number of components in an integrated circuit doubles every 18 months.
There are two major obstacles foreseeable with the continuing growth in computer processing speeds based on the current technology:
  1. Miniaturization approaches non-negotiable physical barriers, and
  2. Energy consumption increases wildly as data processing rates speed up.
Data transmission by laser addresses both issues.

Rainbows at Nano-scale

Communicating data by light already occurs on a wide-spread basis, via fiber optics. Scaling laser light generation and integrating it onto microchips lies at the heart of the HP Corona project.
MIT has demonstrated the technology to generate laser light using materials that are compatible with microchip manufacturing processes, meaning that tiny lasers could be built directly into integrated circuits. Once generated, the laser light beams along a nano-scale waveguide many times thinner than a single fiber optic cable.
The trick that really saves space copies a technique called Dense Wavelength Division Multiplexing (DWDM), which is currently used in telecommunications: light of different wavelengths can multiply the information sent over a single "light wire". HP Labs has demonstrated that up to 64 wavelengths can be managed in 64 "ring resonators", a circle along the path of waveguide, in less that one millimeter. Using electrical impulses at 10GHz to "tune" the ring resonators results in 10Gb/s of data transmission times 64 wavelengths for 640 Gigabits of data per second running along a single "wire".

Lightening the Energy Demand

Projecting from the energy consumption of current super-computers, an exascale computer (performing 1018 or a million trillion operations/second) would require its own Hoover Dam worth of power. Most of that power is consumed not in performing operations, but in communicating between parallel processors to schedule tasks and balance loads or in sending data to memory.
Laser-based data transmission reduces heat loads compared to electricity, and the greater bandwidths for communication significantly reduce the power requirements. According to Wired: "Using electronics for a 10-terabytes-per second channel between a CPU and external memory would require 160 watts of power. But HP Labs researchers calculate that using integrated photonics lowers that to 6.4 watts."
Even before exascale computing appears on every desktop, the energy savings could be significant.

Coming Soon to a Desktop Near You

Photonic data transfer between components within an integrated chip needs a decade more research, but data transfer between cores or from cores to memory could come to fruition soon. HP targets bringing a 3-D chip with high-bandwidth photonic communications between 256 processor cores to the market by 2017.
HP's Corona project races against other giants -- such as Intel (Runnemede), MIT (Angstrom), NVIDIA (Echelon), and Sandia National Labs (X-calibur) -- in the search to make high performance computing ubiquitous.

Post Comment